The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion. If the flow rate is large and the pressure d...

Plate heat exchanger is a kind of heat exchange equipment widely used in modern industry and civil use. It has been widely used in heating, refrigeration, chemi...

The plate heat exchanger needs to be disassembled and inspected during maintenance, repair or cleaning. Therefore, it is necessary to understand the method and ...

  Propellent plate evaporators can be divided into the following three categories according to the evaporation process:     (1) Atmospheric pressure evaporatio...

The plate heat exchanger is made up of a series of metal plates with a certain corrugated shape. In the daily use of the heat exchanger, in order to ensure the ...

(1) Primary brine process The raw salt enters the salt tank, and the light brine from the electrolysis process, the equipment recovered water and the supplemen...

Propellent plate evaporator is a high-efficiency and energy-saving evaporation equipment. Compared with the shell and tube evaporator, it has the following adva...

Desalination refers to the removal of extra salt and minerals from seawater, and then fresh water treatment. In this process, the plate heat exchanger is used f...

The working principle of the pasteurizer is to heat the mixed raw materials to 68～70℃, keep this temperature for 30min, and then rapidly cool to 4-5℃. Generally...

The plate heat exchanger is used for the heat exchange of two media. There are usually four interfaces above, namely the cold side medium inlet, the cold side m...

The structure of the plate heat exchanger is relatively simple.It is mainly composed of plate,gasket,fixed cover,movable cover,guide bar,tightening bolt and nut...

Plate heat exchanger plates are stamped by high-precision molds at one time. The same batch of plates have the same precision, and there are even metal contact ...

The plate heat exchanger gasket is a key part of the heat exchanger. Due to the continuous expansion of the application field of plate heat exchangers, differen...

The plate heat exchanger can be used as a waste water heat exchanger. It is suitable for occasions where heat is recovered or released in contaminated liquid (u...

The fully welded plate heat exchanger adopts an excellent welding process. Since the heat transfer elements are not sealed with any non-metallic materials, they...

The fermentation industry is a very broad industry in the light industry ,including food additives, medicine, biological preparations, condiments, alcohol, chem...

Keeping the plates of the plate heat exchanger clean is one of the important conditions for maintaining a high heat transfer coefficient. Between the plates, th...

In marine turbines, heat exchange is undoubtedly a very critical factor to ensure the normal use of the engine. Because when the turbine is working, it needs...

Pulp cooking: Put the papermaking raw materials and cooking liquor into the digester, and then heat it with steam to remove the non-cellulose part of the fibrou...

Application of plate heat exchanger in beverage industry: As a highly efficient heat exchange device, plate heat exchangers have a small gap between the pl...