Due to the special design plate and gasket structure of the plate condenser, which has high efficient of heat transfer effect for the steam condensation.

In a plate condenser, the heat transfer plate and the sealing gasket form a channel for the flow of the medium. Two different media flow in opposite directions in adjacent channels to complete the heat exchange. The plate is embossed with beveled corrugations and sealing grooves are pressed around the corner holes and all around. Rubber gaskets are attached to the inner side of the sealing grooves with adhesive. Since the different corrugated plates can be turned over to form cross-sectional channels, the fluid flows in three dimensions in the corrugated plate sheet flow channel, which can produce turbulent flow with low Reynolds number and therefore high heat transfer coefficient.

There are still some other points：

        1. The plate condenser is highly adaptable and it can accommodate two different corrugated shapes of plates at the same time.

2. The water consumption of plate condensers is less than other equipment, it is about half of that of conventional equipment.

3. The high heat transfer efficiency is due to the fact that the condenser is a plate condenser, so it can adjust the heat transfer efficiency by adding or reducing the plates according to its own needs.

4、The plate pattern for cold side fluids are large size holes with large corrugated pitch, which can ensure full condensation of steam in low pressure.

5, The frame structure of plate condenser is simple and rigid, the weight of it is light. To meet the low cost while also ensuring the quality of the product. There are also many varieties of materials to meet the needs of different processes.